Product description
Powerful 24V radial fan, due to it's dimensions and airflow great for cooling prints. Can be easily mounted next to your hot-end for example.
By using PWM the fan speed can be controlled to reduce the airflow, allowing much flexibility to find the optimum speed for cooling 3D prints. With this fan even PWM levels as low as of 20% of the maximum can be used.
This fan has two 4.5mm mounting holes, 57mm apart. The air is draw into the fan from one side through a 33mm diameter input, while the output is 20x15mm including a 1mm thick wall. Because of the 1.5m wire with a pre-crimped molex connector, this radial fan can be easily connected to your electronics.
Specifications
| General properties | |
|---|---|
| sku | RADIALFAN50DC24V |
| gtin | 8719345005930 |
| Type | Radial |
| Dimensions | |
| Product Dimensions | 52x52x15 mm |
| Width | 51.5 mm |
| Height | 51.5 mm |
| Depth | 15 mm |
| Mounting hole size | 4.5 mm |
| Mounting hole size | 4.5 mm |
| Wire length | 150 cm |
| Electrical specifications | |
| Supply voltage | 24 V |
| Current Rating | 0.06 mA |
| Wire length | 150 cm |
| Operating voltage | 24 V |
| Current | 0.06 A |
| Fan properties | |
| Type | Radial |
Price breaks
| 1 - 4: | excl 44.16 DKK incl 55.20 DKK |
| 5 - 9: | excl 41.92 DKK incl 52.40 DKK |
| 10 - 29: | excl 40.80 DKK incl 51 DKK |
| 30 - : | excl 39.76 DKK incl 49.70 DKK |
| Need a larger quantity? Contact our Sales department. | |
