Let your PC communicate with your microelectronic using this adapter board. The adapter can be inserted in a USB slot. For the best performance at least USB 2.0 is recommended. Includes 20cm jumper wiring with the board to hook up to your electronics. We recommend using a USB extension cable for connecting the board to your PC, increasing the length of the jumper wires will increase the rate of transmission failures.
The following pins are broken out:
3,3V - 3V3 power
TXD - Transfer pin
RXD - Receive pin
GND - Ground
5V - 5V power
1 - 4: | excl 36.64 DKK incl 45.80 DKK |
5 - 9: | excl 34.80 DKK incl 43.50 DKK |
10 - 29: | excl 33.92 DKK incl 42.40 DKK |
30 - : | excl 32.96 DKK incl 41.20 DKK |
Need a larger quantity? Contact our Sales department. |