Capricorn

Capricorn is a manufacturer of high quality PTFE tubing for consumer grade and DIY 3D printers. Compared to cheaper brands, both TL and XS tubing reduce friction, and thus the residual effects of pressure buildup, in bowden systems for high speed printing. XS tubing provides a slightly lower friction coefficient along with tighter diameter tolerances for 1.75 mm filament, and thus is the recommended choice for higher quality filament brands. XS tubing is less translucent than TL, but allows for higher temperature filaments for hotends in which the tubing extends into the heater block (most Chinese designs do this).

Official Capricorn XS Heat Break Liner for 1.75 mm (30cm)
High quality heat break liner
  • Inside Diameter: 2mm
  • Outside Diameter: 3mm
  • Color: Deep blue
  • Max temperature: 250 degrees
 
 
€ 11.95
In stock
Premium cutting tool for PTFE tubes
Ultra sharp cutting tool for PTFE tubing
 
 
€ 12.50
In stock
Official Capricorn TL 1 Meter PTFE tubing for 1.75 mm
  • 100cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 1.9mm (± .05mm)
  • OD: 4.0mm
 
 
€ 13.50
In stock
Official Capricorn XS 1 Meter PTFE tubing for 1.75 mm
  • 100cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 1.9mm (± .05mm)
  • OD: 4.0mm
 
 
€ 13.50
In stock
Official Capricorn TL 1 Meter PTFE tubing for 2.85 mm
The high quality PTFE tubing you are looking for
  • 100cm low friction PTFE
  • Flexible and low stretch
  • For 2.85mm filament
  • ID: 3.2mm (± .05mm)
  • OD: 6.4mm
 
 
€ 21.50
In stock
Official Capricorn XS 1 Meter PTFE tubing for 2.85 mm
The high quality PTFE tubing you are looking for
  • 100cm low friction PTFE
  • Flexible and low stretch
  • For 2.85mm filament
  • ID: 3.0mm (± .05mm)
  • OD: 6.4mm
 
 
€ 21.50
In stock
Official Capricorn TL 2 Meter PTFE tubing for 1.75 mm
  • 200cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 1.9mm (± .05mm)
  • OD: 4.0mm
 
 
€ 23.50
In stock
Official Capricorn XS 2 Meter PTFE tubing for 1.75 mm
  • 200cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 1.9mm (± .05mm)
  • OD: 4.0mm
 
 
€ 23.50
In stock
Official Capricorn TL 1 Meter PTFE tubing for 1.75 mm w/ Cutters
 
 
€ 24.50
In stock
Official Capricorn XS 1 Meter PTFE tubing for 1.75 mm w/ Cutters
 
 
€ 24.50
In stock
Official Capricorn TL & XS 1 Meter PTFE tubing for 1.75 mm
Official Capricorn TL & XS 1 Meter PTFE tubing for 1.75 mm
  • 100cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 1.9mm (± .05mm)
  • OD: 4.0mm
 
 
€ 24.50
In stock
Official Capricorn TL PTFE tubing set for Creality 3D printers
 
 
€ 29.50
In stock
Official Capricorn XS PTFE tubing set for Creality 3D printers
 
 
€ 29.50
In stock
Official Capricorn TL 1 Meter PTFE tubing for 2.85 mm w/ Cutters
 
 
€ 32.50
In stock
Official Capricorn XS 1 Meter PTFE tubing for 2.85 mm w/ Cutters
 
 
€ 32.50
In stock
Official Capricorn TL 2 Meter PTFE tubing for 1.75 mm w/ Cutters
 
 
€ 34.50
In stock
Official Capricorn XS 2 Meter PTFE tubing for 1.75 mm w/ Cutters
 
 
€ 34.50
In stock
Official Capricorn TL 2 Meter PTFE tubing for 2.85 mm
The high quality PTFE tubing you are looking for
  • 200cm low friction PTFE
  • Flexible and low stretch
  • For 2.85mm filament
  • ID: 3.2mm (± .05mm)
  • OD: 6.4mm
 
 
€ 38.50
In stock
Official Capricorn XS 2 Meter PTFE tubing for 2.85 mm
The high quality PTFE tubing you are looking for
  • 200cm low friction PTFE
  • Flexible and low stretch
  • For 2.85mm filament
  • ID: 3.0mm (± .05mm)
  • OD: 6.4mm
 
 
€ 38.50
In stock
Official Capricorn TL & XS 1 Meter PTFE tubing for 2.85 mm
The high quality PTFE tubing you are looking for
  • 100cm low friction PTFE
  • Flexible and low stretch
  • For 2.85mm filament
  • ID: 3.2mm (± .05mm)
  • OD: 6.4mm
 
 
€ 40.50
In stock
Official Capricorn TL & XS 2 Meter PTFE tubing for 1.75 mm
  • 200cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 1.9mm (± .05mm)
  • OD: 4.0mm
 
 
€ 44.50
In stock
Official Capricorn TL 2 Meter PTFE tubing for 2.85 mm w/ Cutters
 
 
€ 49.50
In stock
Official Capricorn XS 2 Meter PTFE tubing for 2.85 mm w/ Cutters
 
 
€ 49.50
In stock
Official Capricorn TL & XS 2 Meter PTFE tubing for 2.85 mm
The high quality PTFE tubing you are looking for
  • 200cm low friction PTFE
  • Flexible and low stretch
  • For 2.85mm filament
  • ID: 3.2mm (± .05mm)
  • OD: 6.4mm
 
 
€ 74.50
In stock
Why ReprapWorld?
  • Orders dispatched same business day
  • 3.000+ products in our assortment
  • More than 45.000 satisfied customers in over 40 countries
  • Secure payment for all payment options
  • Professional tech support (over 10 years 3D experience)
45.000+ satisfied customers

4.4 stars on Google

Pay safely using


Copyright 2009 - 2022 | ReprapWorld