Various parts

Compression spring - 20MM - OD 5MM
  • Compression spring for extruders and heated beds
  • Outside diameter: 5mm
  • Inside diameter: 3.5mm
  • Total coils: 12
  • Length: 20mm
 
 
8 DKK
In stock
Compression spring - 25MM - OD 10MM
 
 
8 DKK
In stock
Cotton heater block insulator ( 3mm )
 
 
8.70 DKK
In stock
Bearing rod|8mm
Fits in 608zz bearings to make a filament guide
 
 
23.30 DKK
In stock
Hot-end cleaning brush ( Copper )
 
 
28.70 DKK
In stock
PTFE Tape (12m)
Thread sealing tape
 
 
30.20 DKK
In stock
Kapton tape ( 8 mm / 33 m )
 
 
45.80 DKK
In stock
MK8 - Heaterblock
 
 
76.50 DKK
In stock
Blue Silicone Socks (3pcs)|MK7/MK8/MK9
High temperature non-stick silicone socks, compatible with multiple hotends
  • Compatible with multiple hotends
  • Durable: at least 100 print hours
  • Compatible with: MK7/MK8/MK9
 
 
88.50 DKK
In stock
Mosquito Boron Nitride Paste
High-quality Thermal conductivity paste
  • Thermal paste for improving conduction
  • Acts as a release agent
  • Retails in 5 cc syringes with luer lock fittings.
 
 
95.50 DKK
In stock
MK10 - Heat-break ( 1.75 mm )
 
 
104 DKK
In stock
MK8 heat-break with inline PTFE tube for 1.75mm filament ( M6x40 )
  • Hot-end type: MK8
  • Material: Stainless steel
  • Length: 40mm
  • Thread: M6
 
 
104 DKK
In stock
MK8 heat-break with inline PTFE tube for 1.75mm filament ( M6x40 )
  • Hot-end type: MK8
  • Material: Stainless steel
  • Length: 40mm
  • Thread: M6
 
 
104 DKK
In stock
DDX v2 Rear Housing SLS
Upgrade your Micro Swiss all metal Hotend with this Rear housing for DDX
  • Fit the Micro Swiss hotends in your DDX.
  • SLS made part using Poliamide 12 (Nylon)
 
 
153 DKK
In stock
Nozzle starter kit
The kit that provides you with what you need to make big prints with a lot of details
  • Suitable for Creality and Anet
  • 1.75 mm filament
  • Perfect addition for big prints
 
 
225 DKK
In stock
Copperhead RepRap 1.75 Heat Break
This is a low-cost, open-source hotend option that can handle the heat.
  • Heat break for hot-end
  • Bimetallic
 
 
252.50 DKK
In stock
Copperhead Hot End|for the Bondtech BMG
Copperhead hot end and heat sink compatible with Bondtech BMG and QR.
  • Hot end with standard heat break and heat sink
  • Rated up to 450°C
 
 
827.50 DKK
In stock
Bowden Hotend kit for Creality printers
Transform your Hotend to a Bowden version with this kit for Creality printers
  • Suitable for Creality
  • 1.75 mm filament
  • Sustainable aluminium
  • Capricorn PTFE tube
 
 
839 DKK
In stock
DDX Copperhead upgrade
DDX Copperhead upgrade
Slice Engineering
Upgrade your DDX Direct Drive eXtruder with this DDX Copperhead
  • Upgrade the stock hotend to PHase 3
  • All-metal
  • Use even shorter retractions
 
 
880.75 DKK
In stock
DDX Mosquito upgrade
Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito™ hotend to PHase 3
  • Upgrade the stock hotend to PHase 3
  • All-metal
  • Use even shorter retractions
 
 
1,337 DKK
In stock
Why ReprapWorld?
  • Orders dispatched same business day
  • 3.000+ products in our assortment
  • More than 45.000 satisfied customers in over 40 countries
  • Secure payment for all payment options
  • Professional tech support (over 10 years 3D experience)
Pay safely using


home
Copyright 2009 - 2022 | ReprapWorld